ROFUN LT (Basice version) 36cc
| Scale 1：5 |
| 1,ROFUN 36cc 4 bolt double RINGS engine(with NGK and walbro carb.1107),single cylinder,two stroke,air-cooled |
| 2.LxWxH:965x527x311mm |
| 3、Tread:525mm |
| 4,Wheelbase(F/R):610mm |
| 5.Dominator side pipe |
| 6, 800CC huge capacity fuel can |
| 7, 4WD drive system |
| 8,3-section metal diff.system (front,middle and rear) |
| 9,diff.double disc brake mode |
| 10,Front CVD drive half-shaft,rear axes drive half-shaft |
| 11,Front short drive shaft and rear long drive shaft for power take-off |
| 12,New structure differential bracket |
| 13,Metal clutch cup support cover |
| 15,2.4G 6 Channels RC-X6 transmitter |
| 16,60KG metal throttle servo (WITH CNC SERVO ARM) |
| 17,60KG metal steering servo with CNC servo arm |
| 18,6V4500 ni-mh battery |
| 19,7MM metal front and rear hydraulic shocks |
| 20,Front & rear lean prevention set |
| 21,5MM cnc incorporated 6061T6 alloy bottom chassis |
| 22,High strengthed PC four-pcs shells |
| 23,full protection roll cage(easy to take apart) |
| 24,High performance LT splinter off-road tyres with new hubs |
| 25.8000rmp cluth set |
| 26,Metal front&rear shocks support |
| 27,New ratio can |
| NW 17.5 kg |
| GW 22 kg |
| Packing size：990x560x365 mm |
ROFUN LT450 45CC
| Scale 1：5 |
| 1,ROFUN 45cc 4 bolt double RINGS engine(with NGK and walbro carb.1107),single cylinder,two stroke,air-cooled |
| 2.LxWxH:965x527x311mm |
| 3、Tread:525mm |
| 4,Wheelbase(F/R):610mm |
| 5.New R2 Silenced stainless steel exhaust pipe |
| 6, 800CC huge capacity fuel can |
| 7, 4WD drive system |
| 8,3-section metal diff.system (front,middle and rear) |
| 9,diff.double disc brake mode |
| 10,Front CVD drive half-shaft,rear axes drive half-shaft |
| 11,Front short drive shaft and rear long drive shaft for power take-off |
| 12,New structure differential bracket |
| 13,Metal clutch cup support cover |
| 14,X9S Color LCD display 9-channel remote control |
| 15,60KG metal throttle servo (WITH CNC SERVO ARM) |
| 16,60KG metal steering servo with CNC servo arm |
| 17,6V4500 ni-mh battery |
| 18,7MM metal front and rear hydraulic shocks |
| 19,Front & rear lean prevention set |
| 20,5MM cnc incorporated 6061T6 alloy bottom chassis |
| 21,High strengthed PC four-pcs shells |
| 22,full protection roll cage(easy to take apart) |
| 23,High performance LT Full terrain Tyres with new sealed nuts |
| 24.8000rmp cluth set |
| 25,CNC metal front and rear support beams |
| 26,CNC steering Servo support bridge |
| 27,CNC Metal front and rear shock support frames |
| 28,CNC Metal steering plate |
| 29,CNC Metal medium differential cover |
| 30,New ratio can |
| 31, incorporated Hex.clutch bell kits |
| 32,Attached with service kit bag |
| 33,ATTACHED WITH SHOCK OIL BAG、DIFF.GEAR OIL BAG、AIRFILTER OIL BAG |
| NW 18.5 kg GW：23 kg |
| Packing size: 990x560x365 mm |
